Siemens SINAMICS S120 Function Manual page 199

Commissioning
1. Activating the function for vector and infeed drive object
– Automatic restart: set mode (p1210).
– Flying restart: Activate function (p1200).
2. Set starting attempts (p1211).
3. Set waiting times (p1212, p1213).
4. Check function.
Important parameters (refer to the List Manual)
S r0863
S p1207
S p1208
S p1210
S p1211
S p1212
S p1213
© Siemens AG 2006 All Rights Reserved
SINAMICS S120 Function Manual, 03/2006 Edition
CO/BO: Drive coupling status word/control word
BI: Automatic restart – connection to the following DO
BI: Automatic restart – infeed fault
Automatic restart, mode
Automatic restart, attempts to start
Automatic restart, delay time start attempts
Automatic restart, waiting time increment
Extended Functions
Automatic restart (vector, infeed)
4-199