Adding User Ids - GE Sievers 500 RL Operation And Maintenance Manual

Chapter 5: Password Protection and DataGuard
After you log in for the first time, create a new administrator-level account and inactivate the default
administrator account as follows:
7. Press the Menu button and select the DataGuard tab.
8. Press the Add User button.
9. Specify a new User ID for the administrator and press the Enter button.
10. Specify the Password for the administrator User ID and press Enter.
11. Verify the Password and press Enter.
12. Press the User Level button and select Administrator.
13. Press the Password Expired button and select False.
14. Press the Back button.
15. Press the Logout button. You will now use the new administrator account and delete the default
account.
16. Press the Login button and enter the new User ID and Password you just created.
17. Select the DataGuard tab.
18. Press the Edit User button.
19. Use the arrow buttons to highlight the default administrator account and press OK.
20. Press the User Status button and select Inactive.
21. Press the Menu button to return to the Menu screen.
Once you inactivate the default administrator account, it cannot be used to access
Note:
the Analyzer. If you forget the login information for the new administrator account
that you have created, contact GE Analytical Instruments for assistance.

Adding User IDs

After DataGuard has been enabled, you can add a User ID by following these steps:
1. Select the DataGuard tab.
2. Press the Add User button.
3. Specify a new User ID and press the Enter button. (If you enter an existing User ID, an error message will
display.)
4. Specify the temporary Password for the new User ID and press Enter. Unless you change the expiration
status (see "Editing User Information" below), the user will be required to change the Password when
logging in for the first time.
5. Verify the Password and press the Enter button.
GE Analytical Instruments ©2010 106 of 226 DLM 74001-04 Rev. A