Figure 10 The Sievers 500 Rl On-Line Toc Analyzer Main Screen - GE Sievers 500 RL Operation And Maintenance Manual

Chapter 4: Basic Analyzer Operation
Note: If Password protection is enabled, you may be required to log in before starting
analysis or proceeding to the Menu screen. If Data guard is enabled, you will be
required to log in before starting analysis or proceeding to the Menu screen. See
"Menu Map — DataGuard (Optional Upgrade)" on page 103 and "Using DataGuard"
on page 105 for more information.
The Main screen is divided into three areas:
1. The Header contains the name of the screen, the date and time, and status icons representing the
following conditions:
• The Key icon (
• The Padlock icon (
• The W icon displays when a warning has been issued and the E icon displays when an error has
been issued. (See "Reviewing Warnings and Errors" on page 87 for more information.)
2. The Data area shows indicators for the status of the Analyzer's primary consumables (see "Displaying
Consumables Status" on page 86 for more information). Information about TOC measurements also
displays, depending on which mode the Analyzer is in:
• In the On-Line modes, a trend graph displays on the Main screen; to change the scale and specify
which readings display on the graph, see "Graphing Data History" on page 74.
• In Grab mode, a table of data statistics displays on the Main screen.
GE Analytical Instruments ©2010
Figure 10: The Sievers 500 RL On-Line TOC Analyzer Main Screen

) displays when basic Password security is enabled.

) displays when DataGuard is enabled.
68 of 226
Header
Data area
Status area
DLM 74001-04 Rev. A