Printing Data History - GE Sievers 500 RL Operation And Maintenance Manual

Chapter 4: Basic Analyzer Operation

Printing Data History

The Analyzer can print the data history for any valid time range that you specify. To print data, follow these
steps. On configurations without conductivity measurement, some options are not available.
1. Select the Data tab.
2. Press the Print button.
3. Press the Range button to specify a preset time range: 1 Day, 1 Week, All, or Custom.
• If you select a Custom range, press the To Date and From Date buttons and enter the desired time
range values.
4. Press the Values button to specify which data will print:
• TOC/tCond/Mode — Prints TOC and temperature-corrected conductivity data and and the mode in
which the data was measured.
• TOC/rCond/Temp — Prints TOC, raw conductivity, and temperature data
• TOC/Mode — Displays TOC data and the mode in which the data was measured.
• TOC/IC/TC — Prints TOC, IC, and TC data.
5. Press the Print button to print the data.
Note:
Prior to printing, you may want to confirm your printer settings. See "Configuring
Printer Settings" on page 80 for more information.
GE Analytical Instruments ©2010
Figure 14: Graphing the Data History
75 of 226 DLM 74001-04 Rev. A