User Reference Blocks; Considerations - GE AutoSigma 3000 DL Technical Reference, Operating Manual

Entering reference block values
Step
1 Open the parameter
menu.
2
Step through the menu
to the STD 1 parameter.
3 Move across to the set-
ting fi eld.
4 Decrement to required
level.
5 Return to parameter
fi eld.
6 Step to the STD 2 pa-
rameter.
7 Move across to the set-
ting fi eld.
AutoSigma 3000
Key Display
Issue 04, 06/2007
Step
8 Increment to required
level.
9
Return to normal mea-
surement mode.

User reference blocks

Can be used to set the AutoSigma 3000 DL, provided
that
• STD 1 is within the range 30 to 63 % IACS,
• STD 2 is within the range 6 to 50 % IACS and
• STD 1 is at least 10 % IACS above STD 2.
The values are entered in the unit in the same way as
the STD blocks.

Considerations

If user reference blocks are used, accuracy can be
compromised and range limited.
Operation
Key Display
Normal measure-
ment display
5 - 5