Chapter 4: Basic Analyzer Operation
Adjusting Display Contrast Settings
The Analyzer's color LCD can be adjusted for proper viewing in your environment as follows:
1.
Select the Maintenance tab.
2.
Press the Advanced button.
3.
Press the Advanced Setup button.
4.
Press the Contrast Adjust button and use the keypad to change the contrast level of the display. Press
Enter to change the contrast to the new value, and then push Menu to exit. Use a smaller number to
increase screen brightness.
NOTE:
Your Contrast Adjust button may be inactive depending on the type of display in
your instrument. This display type does not need contrast adjustment.
Naming the Analyzer Location
You can assign a name to the Analyzer that displays on printed and exported data. This feature is particularly
useful if you have multiple Analyzers at your facility and want to easily distinguish data collected from each
instrument. To assign a name, follow these steps:
1.
Select the Maintenance tab.
2.
Press the Advanced button.
3.
Press the Advanced Setup button.
4.
Press the Location button.
5.
Use the keypad to specify a name for the Analyzer and press Enter.
Changing the Display Mode
By default, the Analyzer displays the TOC and conductivity values on the Main screen. You can change the
display for other values as follows:
1.
Select the Maintenance tab.
2.
Press the Advanced button.
3.
Press the Advanced Setup button.
4.
Press the Display Mode button.
5.
Select the values you want displayed on the Main screen: TOC/tCond, TOC/rCond/Temp, TOC, or TOC/
IC/TC, TOC/IC/rCond, TOC/IC/tCond.
GE Analytical Instruments ©2010
90 of 226
DLM 74001-04 Rev. A