Same Symbol Time Outs - Honeywell HF680 User Manual

Same Symbol Time Outs

These numbers determine the length of time before a barcode can be rescanned after it is removed from the scan field. Single
code fixed settings in msecs of No, 50,100,200,750,1200(1.2 sec),2000(2.0 sec) and infinite are available. User configurable
values can be set in user-configurable increments of 50 msecs to 6350 msecs (6.35 sec).
Note: This feature only take effect in Streaming Presentation Mode.
No Same Symbol Time Out
Same Symbol Time Out 200 msecs
* Same Symbol Time Out 750 msecs
Same Symbol Time Out 1200 msecs
Infinite Same Symbol Time Out
The scanner will not repetitively
Scan the same barcode.
Same Symbol Time Out 100 msecs
Same Symbol Time Out 500 msecs
Same Symbol Time Out 2000 msec
~ Variable Same Symbol
Time Out
Using the Multi-Code Method,
scan this barcode and a code
byte sequence from section
"Code Byte Usage" to set the
same symbol time-out
duration. Values range from
001 to 127(50 to 6350 msecs).
3 – 4