Sharp MX-M550U Service Manual page 381

MX-M700N
[P] DRIVE SECTION
1. Disassembly and assembly
A. Fusing drive section
No. Unit No.
(1) Fusing drive unit
(2) Others
(1) Fusing drive unit
1) Remove the fusing unit.
(See "(1) Fusing unit" in the "FUSING SECTION")
2) Remove the fusing motor. (See "(2)-a. Fusing motor")
3) Disconnect the connector and remove the harnesse clamp.
4) Remove the fusing drive unit.
* Remove the screw which was indicated with the arrow mark.
Parts
a Paper exit motor 1
b Paper exit motor 2
a Fusing motor
(1)-a
(1)-b
(1)
MX-M700N DRIVE SECTION P – 1
a. Paper exit motor 1
b. Paper exit motor 2
1) Remove the fusing unit.
(See "(1) Fusing unit" in the "FUSING SECTION")
2) Remove the fusing drive unit. (See "b-1. Fusing motor")
3) Disconnect the connector, and remove the fusing drive frame.
(2)-a
4) Remove the paper exit motor 1 (A) and the paper exit motor 2
(B).
(2) Others
a. Fusing motor
1) Remove the rear cabinet and the rear cabinet upper.
B
A