Sharp MX-M550U Service Manual page 137

NOTE: Only the set value is changed and no printing is performed.
SIMULATION 46-21
EXP.LEVEL SETUP SCANNER(AUTO SET), PRESS START.
0.SCANNER EXP.LEVEL 50
46-22
Purpose Adjustment
Function (Purpose) Used to adjust the scanner exposure level
in the normal text mode.
Section —
Operation/Procedure
1) Select the number corresponding to one of the following
adjustment items with 10-key. (Select one of 0 - 5.)
* Normal mode (Image density adjustment level)
* Auto mode
2) Press the [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [P] key.
The adjustment value is set.
Item
0 AUTO Auto
1 1.0 Exposure level 1
2 2.0 Exposure level 2
3 3.0 Exposure level 3
4 4.0 Exposure level 4
5 5.0 Exposure level 5
NOTE: Only the set value is changed and no printing is performed.
SIMULATION 46-22
EXP.LEVEL SETUP SCANNER(NORMAL). SELECT 0-5, AND PRESS
START.
0.AUTO 50 1.1.0 50
3.3.0 50 4.4.0 50
46-23
Purpose Adjustment
Function (Purpose) Used to adjust the scanner exposure level
in the fine text mode.
Section —
Operation/Procedure
1) Select the number corresponding to one of the following
adjustment items with 10-key. (Select one of 0 - 11.)
* Normal mode (Image density adjustment level)
* Normal mode (Image density adjustment level) (Half-tone
mode)
* Auto mode
* Auto mode (Half-tone mode)
2) Press the [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [P] key.
The adjustment value is set.
Setting
range
0 - 99
2.2.0 50
5.5.0 50
MX-M700N SIMULATION 7 – 43
0 AUTO
1 1.0
2 2.0
0
3 3.0
4 4.0
5 5.0
6 AUTO (H)
7 1.0 (H)
8 2.0 (H)
9 3.0 (H)
10 4.0 (H)
11 5.0 (H)
NOTE: Only the set value is changed and no printing is performed.
SIMULATION 46-23
EXP.LEVEL SETUP SCANNER(FINE). SELECT 0-11,AND PRESS
START.
0.AUTO
3.3.0
6.AUTO(H)
Default
9.3.0(H)
50
46-24
Purpose
Function (Purpose) Used to adjust the scanner exposure level
Section
Operation/Procedure
1) Select the number corresponding to one of the following
adjustment items with 10-key. (Select one of 0 - 11.)
1
* Normal mode (Image density adjustment level)
* Normal mode (Image density adjustment level) (Half-tone
mode)
* Auto mode
* Auto mode (Half-tone mode)
2) Press the [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [P] key.
The adjustment value is set.
0 AUTO
1 1.0
2 2.0
3 3.0
4 4.0
5 5.0
6 AUTO (H)
7 1.0 (H)
8 2.0 (H)
9 3.0 (H)
10 4.0 (H)
11 5.0 (H)
NOTE: Only the set value is changed and no printing is performed.
Item
Auto
Exposure level 1
Exposure level 2
Exposure level 3
Exposure level 4
Exposure level 5
Auto (Half-tone)
Exposure level 1
(Half-tone)
Exposure level 2
(Half-tone)
Exposure level 3
(Half-tone)
Exposure level 4
(Half-tone)
Exposure level 5
(Half-tone)
50 1.1.0 50 2.2.0 50
50 4.4.0 50 5.5.0 50
50 7.1.0(H) 50 8.2.0(H)
50 10.4.0(H) 50 11.5.0(H)
Adjustment
(in the super fine text mode).
—
Item
Auto
Exposure level 1
Exposure level 2
Exposure level 3
Exposure level 4
Exposure level 5
Auto (Half-tone)
Exposure level 1
(Half-tone)
Exposure level 2
(Half-tone)
Exposure level 3
(Half-tone)
Exposure level 4
(Half-tone)
Exposure level 5
(Half-tone)
Setting
Default
range
0 - 99 50
1
50
50
Setting
Default
range
0 - 99 50