Sharp MX-M550U Service Manual page 165

66-60
Purpose Setting
Function (Purpose) Used to set the ACR data.
Section FAX
Operation/Procedure
1) Enter the number corresponding to the set item with 10-key.
The item list menu can be switched by pressing [P] key.
2) Press [START] key.
3) Enter the setting value with 10-key.
4) Press [START] key.
This simulation can be executed when soft SW 24-4 and 24-5 are
set to 1.
Display/Not display is switched by soft SW 24-4 and 24-5.
The digit limitation and characters allowed to be inputted depend
on the input item.
SIMULATION 66-60
ACR SETTING. SELECT NUMBER, AND PRESS START.
SWITCHING OF MENU:[#]
1.Local Carrier Number
3.Overseas Carrier Number
5.User Area Code
7.Version
9.Through Number2
11.Through Number4
13.Through Number6
15.Through Number8
17.Through Number10
67
67-16
Purpose Operation test/Check
Function (Purpose) Used to check the operation of the network
card.
Section MFP controller
Operation/Procedure
During check, "CHECKING" is displayed. When check is com-
pleted normally, "OK" is displayed. In case of an error, "NG" is dis-
played.
(Display message)
CHECKING Checking
OK Check end (Normal)
NG Check end (Error)
SIMULATION 67-16
NETWORK INTERFACE CARD CHECK.
NIC: CHECKING
2.Long-distance Carrier Number
4.Bypass Number
6.Machine Code
8.Through Number1
10.Through Number3
12.Through Number5
14.Through Number7
15.Through Number9
18.Through Number11
MX-M700N SIMULATION 7 – 71
1