(2) Vertical transport upper unit
1)
Remove the resist roller unit. (See "B-(1) Resist roller unit")
2)
Disconnect the connector, and remove the vertical transport
upper unit.
a. Transport roller 13 (Drive)
1)
Remove the vertical transport upper unit.
(See "(2) Vertical transport upper unit")
2)
Remove the upper transport fulcrum plate holder, and remove
the vertical transport upper open/close PG.
3)
Remove the open/close PG earth, and remove the drive con-
nection stopper screw and the bearing.
MX-M700N PAPER TRANSPORT SECTION G – 7
4)
Remove the upper PG holding plate.
5)
Remove the vertical transport upper PG.
6)
Remove the transport roller 13 (Drive).
b. Transport sensor
1)
Remove the vertical transport upper unit.
(See "(2) Vertical transport upper unit")
2)
Check each sensors.