5)
Remove the front belt collar.
6)
Remove the E-ring to remove the transport roller 19 assembly.
7)
Remove the bearing, pulley, gear and pin from the transport
roller 19.
8)
Remove the rear belt collar.
9)
Remove the ground plate.
10) Remove the belt.
11) Remove the E-ring and lift up the switching lever to remove the
12) Remove the bearing, pulley, gear and pin from the transport
13) Remove the U-turn paper guide.
14) Apply the bearing attachment plate to remove transport roller
MX-M700N DUPLEX SECTION H – 6
transport roller 20 assembly.
roller 20.
21.