External View And Internal Structure; Identification Of Each Section And Functions - Sharp MX-M550U Service Manual

MX-M700N

[5] EXTERNAL VIEW AND INTERNAL STRUCTURE

1. Identification of each section and functions

A. External view
Finisher
No.
Name
*1
1 Saddle stitch finisher
*1
Finisher
*1
2 Punch module
*1
3 Inserter
4 Automatic document
feeder
5 Front cover
6 Operation panel
7 Center tray
8 Bypass tray
9 Power switch
10 Paper feed tray 5
*1
(Large capasity tray)
11 Paper feed tray 5
*1
(Large capasity tray)
12 Paper feed trays 1, 2
13 Paper feed tray 3
14 Paper feed tray 4
*1: 1, 2, 3, 10 and 11 are peripheral devices. For information on these devices, see the explanations of the devices in the manual.
1 2
Parts
/ The finisher and the saddle stitch finisher include the offset function, which offsets each
set of copies from the preceding set for easy separation. Each set of sorted copies can
also be stapled.
The saddle stitch finisher can automatically staple at the center line of a set of copies
and fold the pages to create a pamphlet.
A punch unit can be installed to add punch holes to copioes, and an inserter can be
installed to insert blank pages at specified pages.
Adds punch holes to printed pages.
The inserter enables blank sheets or printed sheets to be added to copy and print output
as covers or inserts without printing. Printed output can also be fed one set at a time
from the inserter for stapling or punching without performing stapling or staple sorting
finishing.
This automatically feeds and scans multiple sheet originals. Both sides of two-sided
originals can be scanned at once.
Open to replace toner cartridge.
Performs various setting, display, and simulation operations.
Finished sheets are deposited here
Special papers (including transparency film) and copy paper can be fed from the bypass
tray.
Turns the power on and off.
If the power does not come on when the power switch is turned on, check the main
power switch to see if it is turned on.
The large capacity tray can hold up to 3,500 sheets of commonly used (8-1/2" ✕ 11",
B5, A4) any standard paper (20 lbs. (80 g/m
The large capacity tray can hold up to 3000 sheets of 20 lbs. (80 g/m
The trays hold paper.
Approximately 800 sheets of standard 8-1/2" ✕ 11" or A4 size paper (20 lbs. (80 g/m
can be loaded in tray 1, and approximately 1200 sheets of standard 8-1/2" ✕ 11", A4 or
B5 size paper (20 lbs. (80 g/m
Tray 3 holds. Approximately 500 sheets of standard (20 lbs. (80 g/m
loaded in this tray. Tabbed paper and transparencies can also be loaded.
Tray 4 holds. Approximately 500 sheets of standard (20 lbs. (80 g/m
loaded in this tray.
MX-M700N EXTERNAL VIEW AND INTERNAL STRUCTURE 5 – 1
3 4
Funciton/Operation
2
)).
2
)) can be loaded in tray 2.
5 6 7
14 13 12
2
) paper.
2
))
2
)) paper can be
2
)) paper can be
8
9
10
11
NOTE