Details Of Trouble Code; Mc Trouble; Another Communication Error Occurs; The Network Card Is Not Installed Or Broken - Sharp MX-M550U Service Manual

3. Details of trouble code

C1-00

MC trouble

Details Three successive MHV-T signals are detected
during operation of MHV.
Main charger output abnormality (Output open)
A trouble signal is outputted from the high voltage
transformer.
Section Engine
Case 1 Cause The main charger is not installed properly.
The main charger is not assembled properly.
Check and Use SIM 8-2 to check the main charger output.
remedy Main charger disconnection check
Case 2 Cause The high voltage transformer connector is
disconnected.
The high voltage harness is disconnected or
broken.
Check and Connection check
remedy
Case 3 Cause High voltage unit trouble
Check and Replace the high voltage unit.
remedy
CE-00

Another communication error occurs.

Details Communication error
Section
Case 1 Cause Improper connection of the network cable
Check and Check the connection of the network cable.
remedy
CE-01 The network card is not installed or
broken.
Details Network card connection trouble
Section
Case 1 Cause The network card is not installed on the controller.
Check and Check that the network card is installed on the
remedy controller.
Case 2 Cause Network card control PWB trouble
Check and 1) Output the NIC Config. Page to check the
remedy NIC version.
2) Replace the NIC.
CE-02 The specified mail server or the FTP
server is not found.
Details The specified mail server or the FTP server is not
found.
Section
Case 1 Cause Improper connection of the network cable
Check and Check that the network cable is properly
remedy connected.
Case 2 Cause Network setup trouble
Check and 1) Check that the connected network supports
remedy TCP/IP protocol.
2) Check from the Web Page to confirm that
the Primary/Secondary E-mail server
address or the FTP server/ Desktop PC
address as the destination is properly set.
3) When the above address is described with
the Hostname, check that the DNS server is
properly set or not.
Case 3 Cause An error occurs in the SMTP server/ FTP server/
NTS.
Check and Check the SMTP server/ FTP server/ NTS for any
remedy trouble.
MX-M700N SELF DIAG AND TROUBLE CODE 8 – 6
CE-03 The specified server suspends
response during transmission of
images.
Details The specified server suspends response during
transmission of images.
Section
Case 1 Cause Improper connection of the network cable
Check and Check that the network cable is properly
remedy connected.
Case 2 Cause An error occurs in the SMTP server/ FTP server/
NTS.
Check and Check the SMTP server/ FTP server/ NTS for any
remedy trouble.
CE-04 The entered account name of the FTP
server or the password for authentica-
tion is invalid.
Details The entered account name of the FTP server or
the password for authentication is invalid.
Section
Case 1 Cause Improper connection of the network cable
Check and Check that the network cable is properly
remedy connected.
Case 2 Cause Improper registration of the account name or
improper password registered in the FTP server
as the destination
Check and Check the account name or the password
remedy registered in the FTP server as the destination.
CE-05 The entered directory of the FTP
server is invalid.
Details The entered directory of the FTP server is invalid.
Section
Case 1 Cause Improper connection of the network cable
Check and Check that the network cable is properly
remedy connected.
Case 2 Cause Check for existence of the directory name in the
FTP server registered as the destination.
Check and Check for existence of the directory name in the
remedy FTP server registered as the destination.
CE-06 The specified mail server (POP3) is
not found.
Details The specified mail server (POP3) is not found.
POP3 server access error
Section
Case 1 Cause Improper connection of the network cable
Check and Check connection of the network cable.
remedy
Case 2 Cause Network setup trouble
Check and 1) Check that the connected network supports
remedy TCP/IP protocol.
2) Check on the Web page that the POP3
server address is correctly set.
3) When the above address is described with
the Hostname, check that the DNS server is
properly set or not.
Case 3 Cause An error occurs in the POP3 server.
Check and Check for any error in the POP3 server.
remedy