Sharp MX-M550U Service Manual page 315
Digital multifunctional system
Hide thumbs
Also See for MX-M550U:
- Operation manual (200 pages) ,
- Software setup manual (44 pages) ,
- Operation manual (200 pages)
Table of Contents
Advertisement
(1) Paper feed tray 1 and 2 left PG unit
1)
Open the left lower cabinet.
2)
Remove the resin E-ring, and remove the pressure fulcrum
shaft.
3)
Remove the left vertical transport PG stopper plate.
4)
Open the left door, and remove the left lower cabinet unit.
5)
Remove the left vertical transport PG stopper plate.
6)
Open the left vertical transport unit, and remove it.
MX-M700N PAPER TRANSPORT SECTION G – 6
7)
Remove the paper feed tray 1 and 2 left PG unit.
a. Transport roller 11 (Drive)
1)
Remove the paper feed tray 1 and 2 left PG unit.
(See "(1) Paper feed tray 1 and 2 left PG unit")
2)
Remove the E-ring, the drive collar, and the one-way gear.
* Be careful of the installing direction.
3)
Remove the E-ring and the bearing, and remove the transport
roller 11 (Drive).
Hide quick links:
Advertisement
Table of Contents
