Sharp MX-M550U Service Manual page 321
Digital multifunctional system
Hide thumbs
Also See for MX-M550U:
- Operation manual (200 pages) ,
- Software setup manual (44 pages) ,
- Operation manual (200 pages)
Table of Contents
Advertisement
b. Paper guides
1)
Remove the relay pass unit. (See "(1) Relay pass unit")
2)
Remove the metal fixture.
3)
Remove the lower paper guide unit.
4)
Clean each paper guides.
c. Transport roller 3 (drive)
d. Transport roller 4 (Drive)
1)
Remove the relay pass unit. (See "(1) Relay pass unit")
2)
Remove lower paper guide unit. (See "b. Paper guides")
3)
Remove the rear positioning plate, and remove the paper feed
port PG of the paper feed tray 1 and 2.
MX-M700N PAPER TRANSPORT SECTION G – 12
4)
Remove the bearing, the belt, and the relay pass drive shaft
unit.
5)
Remove the transport roller 3 and 4 (Drive).
6)
Remove the E-ring from transport roller 3 and 4 (Drive), and
remove the belt pulley.
e. Transport roller 2 (Drive)
1)
Remove the relay pass unit. (See "(1) Relay pass unit")
2)
Remove lower paper guide unit. (See "b. Paper guides")
3)
Remove the rear positioning plate, and remove the paper feed
PG of the paper feed tray 1/2.
(See "c. Transport roller 3 (Drive)")
4)
Remove the paper entry side upper plate.
Hide quick links:
Advertisement
Table of Contents
