Address Specification; Multiple Address Specification; Send Function; Receive Function - Sharp MX-M550U Service Manual

d. Address specification
Item Scanner
Address Specified by one-touch, group, or direct address input.
specification
Input from the soft keyboard (Scanner/Internet FAX)
Input the 10-key (Fax)
Selection from LDAP server
Resend
Quick
Setting of No
default address
Number of One- Max. total 999 items (of which 200 items can be
touch address assigned to FTP, desktop and/or SMB)
key registration
Inbound Routing 50 items
List
Inbound routing 1000 items
addresses
Sender Number/ 500 items
Address
Registration
(Inbound
Routing)
Number of Number of Group (1 key) address registration : Max.
Group (1 key) 500 items
address
registtation
Program 8 items
Direct address Input from the soft keyboard
input
Chain dial
Resend Call up nearest address which are specified as a single
destination
Shortcut for Use the 10-key to call up registered numbers of
address addresses.
selection (quick
key)
CC/BCC
Yes
sending
Item name Selective/direct entry from the list
File name Selective/direct entry from the list
Return mail
address
—
Sender name Yes (Selective
from the list/direct
entry from the list/
selection from
LDAP server)
Transmission
message
(message body)
Mail footer
preset
e. Multiple address specification
Item Scanner
Address Specification by one-touch/group/direct address input.
specification *
No. of Group, interface broadcasting total max: 5,000 items
registration
items of direct
address input *
Broadcast send Yes
(Broadcast
send is disabled
for FTP/
Desktop/SMB)
Sequential send
request
* Direct address input: 10-key other than one-touch, and soft key-
board input
• When broadcasting including FAX, the resolution is that of FAX.
Internet Fax Fax
Entry by 10-
key, # key, *
key
Yes (pause
—
key)
—
—
—
(1 default (1 default
address fixed as address fixed
sender name) as sender
name)
No
—
—
Internet Fax Fax
Yes
— Yes
MX-M700N SPECIFICATIONS 2 – 6
• When broadcasting of the internet FAX and the scanner, the res-
olution is that of the internet FAX.
• The compression type when broadcasting depends on the con-
forming of the system setting.
f. Send function
Item Scanner
Memory transmission
When the upper
limit value is set,
memory send is
performed.
Onhook
Quick online send
Direct transmission
Automatic reduction
send
Rotation send Yes (Manual)
Zoom send Yes (Zooming of standard size to standard size
only. (There are combinations that cannot be
rotated.))
Recall Error
mode
Busy
The conditions of recall number and time can be
set with the system setting.
Book document send
Long document send
File division send
Send size limit
Stamp function
No. of registration
items of senders
Address Confirmation
Function (Prevention
of mis-send)
g. Receive function
Item
Automatic reception
Manual reception
Memory reception
Fixed size reduction
reception
Specified size zoom
reception
Rotation reception
Division reception
Duplex reception
2 in 1 reception
Domain/Address
specification receive Yes (50 items)
enable
Domain/Address
specification receive Yes (50 items)
disable
Certain rejection
number setting
External telephone
connection remote
Answering telephone
connection
Transfer function when
output is disable
Automatic boot mode
Internet Fax
—
Yes
—
—
—
—
Yes (Auto)
— Yes
— —
Yes
Yes (Max.800mm)
Yes —
Yes
Yes
Max. 999 items
—
Internet Fax Fax
Yes
Yes
Yes
Yes
—
Yes
Yes (Conditions are set by the system.)
Yes (Conditions are set by the system.)
—
—
—
— Yes
(50 items)
—
Yes
No
—
(PAT countermeasure)
Yes
Yes
Fax
Yes
Yes
Only in
Onhook
Yes
(A3 B4,
A3 A4,
B4 A4
Yes
—
Yes
(Soft
switch)