Sharp MX-M550U Service Manual page 156

65
65-1
Purpose Adjustment
Function (Purpose) Used to adjust the touch panel (LCD dis-
play section) detection position.
Section Operation (Display/Operation key)
Operation/Procedure
Touch the four cross marks (+) sequentially. The coordinates of
pressed positions are set.
When the coordinates setting is completed normally, the display
turns gray. When all the four points are set, the display returns to
the normal state.
SIMULATION 65-1
65-2
Purpose Adjustment/Setup/Operation data output/
Check (Display/Print)
Function (Purpose) Used to check the result of the touch panel
(LCD display) detection position adjust-
ment.
Section Operation (Display/Operation key)
Operation/Procedure
When the touch panel is touched, the X and Y coordinate values of
the touched point and the coordinate values of the specified point
are displayed. The coordinate values set with SIM 65-1 are used as
the reference.
SIMULATION 65-2
100 200 300
100
140
180
66
66-1
Purpose Setting
Function (Purpose) Used to change and check the FAX soft
switch functions. (Used to change and
check the functions provided for the FAX
soft switches.)
Section FAX
Operation/Procedure
Setting of soft switches other than SW1 can be changed and
checked.
1) Enter the soft switch number to be checked or changed with
10-key.
The current set state is displayed.
400 500 600
40
600
200
MX-M700N SIMULATION 7 – 62
2) Enter the number corresponding to the bit to be changed with
10-key.
(Example) When the bit of 5 is to be changed, enter 5.
The set value of 1/0 is alternatively changed every time when
the target key is pressed.
3) After completion of setting of all the bits, press [START] key.
SIMULATION 66-1
FAX SOFT SW. SETTING. SELECT 2-120, AND PRESS START.
66-2
Purpose Data clear
Function (Purpose) Used to clear the FAX soft switch function
data and to set to the default. (Excluding
the adjustment values.)
Section FAX
Operation/Procedure
1) Set the destination code with 10-key.
[Destination code]
Japan 0 0 0 0 0 0 0 0
U.S.A. 1 0 1 1 0 1 0 1
Australia 0 0 0 0 1 0 0 1
U.K. 1 0 1 1 0 1 0 0
France 0 0 1 1 1 1 0 1
Germany 0 0 0 0 0 1 0 0
Sweden 1 0 1 0 0 1 0 1
Newzealand 0 1 1 1 1 1 1 0
China 0 0 1 0 0 1 1 0
Singapore 1 0 0 1 1 1 0 0
TW 1 1 1 1 1 1 1 0
Other1 1 1 1 1 1 1 0 1
Other2 1 1 1 1 1 1 0 0
Ohter3 1 1 1 1 1 0 1 1
Finland 0 0 1 1 1 1 0 0
The codes other than the above are recognized as Japan.
2) Press the [START] key.
3) The confirmation menu of YES/NO of clear is displayed. Select
one.
1 YES FAX soft SW is cleared.
2 NO Not cleared.
4) Press the [START] key.
The soft switch (except for the adjustment values) is cleared
according to the destination selected in procedure 1.
After the data clear, the machine is automatically reset.
NOTE: When the FAX BOX is not installed, initialization including
the adjustment value is performed. (The adjustment value
is stored in the FAX BOX.)
SIMULATION 66-2
FAX SOFT SW. CLEAR(WITHOUT ADJUSTMENT VALUE).
INPUT COUNTRY CODE, AND PRESS START.
Norway 1 0 0 0 0 0 1 0
Denmark 0 0 1 1 0 0 0 1
Netherlands 0 1 1 1 1 0 1 1
Italy 0 1 0 1 1 0 0 1
Switzerland 1 0 1 0 0 1 1 0
Austria 0 0 0 0 1 0 1 0
Indonesia 0 1 0 1 0 1 0 0
Thailand 1 0 0 1 0 0 1
Malaysia 0 1 1 0 1 1 0 0
India 0 1 0 1 0 0 1 1
Philippines 1 0 0 0 1 0 0 1
Hongkong 0 1 0 1 0 0 0 0
Russia 1 0 1 1 1 0 0 0
S. Africa 1 0 0 1 1 1 1 1
1 2 3 4 5 6 7 8