Show Mpls Ldp Bindings - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This example shows how to display all detailed MPLS label forwarding path information.
Switch# Show mpls forwarding-table detail
LSP: 1
Type: Transit
FEC: 201.1.1.0/24
In Label: 1020
Next Hop: 172.18.1.1
LSP: 2
Type: Transit
FEC: 201.2.1.0/24
In Label: 1060
Next Hop: 192.1.1.2
LSP: 3
Type: Egress
FEC: 172.1.1.1/32
In Label: 1050
Next Hop: 172.18.1.1
LSP: 4
Type: Ingress
FEC: 192.1.1.0/24
In Label: -
Next Hop: 172.18.1.1
LSP: 5
Type: Ingress
FEC: VC11/192.1.1.1
In Label: -
Next Hop: 172.18.1.1
LSP: 6
Type: Egress
FEC: VC11/192.1.1.1
In Label: 1200
Total Entries: 6
Switch#
67-32

show mpls ldp bindings

This command is used to display all LDP label binding information.
show mpls ldp bindings
Parameters
None.
Status: Up
Owner: LDP
Out Label: Swap 1030
Out Interface: VLAN 10
Status: Up
Owner: LDP
Out Label: Swap 1040
Out Interface: VLAN 20
Status: Up
Owner: LDP
Out Label: Pop
Out Interface: VLAN 10
Status: Up
Owner: LDP
Out Label: Push 1070
Out Interface: VLAN 10
Status: Up
Owner: LDP
Out Label: Push 1100/1070
Out Interface: VLAN 10
Status: Up
Owner: LDP
Out Label: Pop
769