Show Ip Ospf Database Network - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Network Mask: /24
Metric Type: 2 (Larger than any link state path)
TOS: 0
Metric: 20
Forward Address: 47.65.52.2
External Route Tag: 0
Total Entries: 1
Switch#
71-30

show ip ospf database network

This command is used to display information about the network LSAs.
show ip ospf [vrf VRF-NAME] database network [LINK-STATE-ID | self-originate | adv-router IP-
ADDRESS]
Parameters
vrf VRF-NAME
LINK-STATE-ID
self-originate
adv-router
IP-ADDRESS
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display information about the network LSAs.
Example
This example shows how to display information about the network LSAs.
Switch# show ip ospf database network
LS age: 1034
Options: 0x0 (*|-|-|-|-|-|-|-)
LS Type: network-LSA
Link State ID: 47.65.49.111 (address of Designated Router)
Advertising Router: 47.65.49.111
LS Seq Number: 80000001
(Optional) Specifies the IPv4 OSPF VRF process.
Specifies the link state ID (as an IP address).
Specifies the self-originated link states.
Specifies to display all the LSAs of the specified router.
Specifies the advertise router IP address
Net Link States (Area 0.0.0.0)
829