Debug Vrrp Packets - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
no debug vrrp events
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to turn on or turn off the VRRP event debug switch.
Example
This example shows how to turn on the VRRP event debug switch.
Switch# debug vrrp events
Switch#
interface ip100 link up
interface ip100 link down
Master received a higher priority ADV msg at VR 2 at interface System
Master received a higher priority ADV msg at VR 2 at interface System
Authentication type mismatch on VR 1 at interface System
113-13

debug vrrp packets

This command is used to turn on the VRRP packet debug switch. Use the no form of the command to
turn off VRRP packet debug switch.
debug vrrp packets
no debug vrrp packets
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to turn on or turn off the VRRP packet debug switch.
1263