Ip Multicast (Ipmc) Commands - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide

47. IP Multicast (IPMC) Commands

47-1 clear ip multicast-statistics
This command is used to clear the multicast protocol packet statistics counters.
clear ip multicast-statistics [igmp] [pim] [dvmrp]
Parameters
igmp
pim
dvmrp
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to clear the multicast protocol packet statistics counter on the switch. If no
parameters are specified, all IP multicast protocol statistics counter are cleared.
Example
This example shows how to clear the multicast protocol packet statistics counter.
Switch# clear ip multicast-statistics
Switch#
47-2 ip multicast table-lookup-mode
This command is used to configure the IP multicast forwarding lookup mode. Use the no form of this
command to configure the IP multicast forwarding lookup mode to the default value.
ip multicast table-lookup-mode {ip | mac}
no ip multicast table-lookup-mode
Parameters
ip
mac
Default
By default, the IP option is enabled.
(Optional) Specifies to clear IGMP packets counter.
(Optional) Specifies to clear PIM packets counter.
(Optional) Specifies to clear DVMRP packets counter.
Specifies the multicast forwarding lookup based on the IP address.
Specifies the multicast forwarding lookup based on the MAC address.
579