Clear Ip Dhcp Binding - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
21-2 bootfile
This command is used to specify the configuration file or image file for the DHCP client to boot the device.
Use the no command to remove the specification of the boot file.
boofile URL
no bootfile
Parameters
URL
Default
None.
Command Mode
DHCP Pool Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to specify the configuration file or the image file for the DHCP client to boot the device.
The next-server command specifies the location of the server where the boot file resides.
Example
This example shows how to specify "mdubootfile.bin" as the name of the boot file for DHCP pool 1.
Switch# configure terminal
Switch(config)# ip dhcp pool pool1
Switch(config-dhcp-pool)# bootfile \bootimage\mdubootfile.bin
Switch(config-dhcp-pool)#

21-3 clear ip dhcp binding

This command is used to delete the address binding entry from the DHCP server database.
clear ip dhcp {all | pool NAME} binding [vrf VRF-NAME] {* | IP-ADDRESS}
Parameters
all
pool NAME
vrf VRF-NAME
*
IP-ADDRESS
Specifies the boot file URL. This URL can be up to 64 characters long.
Specifies to clear the binding entries for all pools.
Specifies the name of the DHCP pool.
(Optional) Specifies to clear the binding entry in the specified VRF.
Specifies to clear all binding entries associated with the specified pool.
Specifies the IP address of the binding entry to be deleted.
333