Show Ip Pim Neighbor - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
DR
DR Priotity
Generation ID
Hello Interval
Join Prune timer
PIM Passive Mode
vlan200
Address
PIM
Mode
Neighbor Count
Generation ID
Hello Interval
PIM Passive Mode
vlan300
Address
PIM
Mode
Neighbor Count
DR
DR Priority
Generation ID
Hello Interval
Join Prune Timer
PIM Passive Mode
Total Entries: 3
Switch#
79-18

show ip pim neighbor

This command is used to display the PIM-SM neighbor information.
show ip pim neighbor [INTERFACE-ID]
Parameters
INTERFACE-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
: 90.1.1.1
: 1
: 1645d8a00
: 30 seconds
: 60 seconds
: Disabled
: 50.111.111.111
: Enabled
: Dense
: 0
: 3a5f93
: 30 seconds
: Enabled
: 12.1.1.1
: Enabled
: Sparse-Dense
: 0
: 12.1.1.1
: 1
: 9e3d65
: 30 seconds
: 60 seconds
: Disabled
(Optional) Specifies the interface to display PIM-SM neighbor
information. If the interface ID is not configured, information on all
interfaces will be displayed.
944