Show Ip Pim - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
79-15

show ip pim

This command is used to display the PIM global information.
show ip pim
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the global information of PIM.
Example
This example shows how to display PIM global information.
Switch# show ip pim
PIM Configurations:
Register Checksum Wholepkt: (Not configured)
Register Probe Time
Register Suppression Time
Register Keepalive Time on RP
SPT Threshold
RP Address
90.1.1.1, group-list: static-rp
RP Candidate
priority: 192, interval: 60 seconds, wildcard-prefix-cnt: 0
vlan100, group-list: rp-cand
BSR Candidate
vlan100, hash-mask-length: 30, priority: 1, interval: 60 seconds
SSM group : Movies
Switch#
79-16 show ip pim bsr-router
This command is used to display bootstrap router (BSR) information.
: 5 seconds
: 60 seconds
: 185 seconds
: Infinity
941