Clear Ip Dhcp Conflict - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to delete the binding of addresses. If pool is specified but the IP address is specified
as *, then all automatic binding entries associated with the pool will be deleted. If pool is specified as all
and the IP address is specified, then the automatic binding entry specific to the IP address will be deleted
regardless of the pool that contains the binding entry. If both pool and the IP address are specified, then
the automatic entry of the specified IP address in the specific pool will be cleared.
Example
This example shows how to delete the address binding 10.12.1.99 from the DHCP server database.
Switch# clear ip dhcp all binding 10.12.1.99
Switch#
This example shows how to delete all bindings from all pools.
Switch# clear ip dhcp all binding *
Switch#
This example shows how to delete address binding 10.13.2.99 from the address pool named pool 2.
Switch# clear ip dhcp pool pool2 binding 10.13.2.99
Switch#

21-4 clear ip dhcp conflict

This command is used to clear the DHCP conflict entry from the DHCP server database.
clear ip dhcp {all | pool NAME} conflict [vrf VRF-NAME] {* | IP-ADDRESS}
Parameters
all
pool NAME
vrf VRF-NAME
*
IP-ADDRESS
Default
None.
Command Mode
Specifies to clear conflict entries for all pools.
Specifies the name of the DHCP pool.
(Optional) Specifies to clear DHCP conflict entries in the specified
VRF.
Specifies to clear all conflict entries associated with the specified pool.
Specifies the IP address of the conflict entry to be deleted.
334