Cpu Port Statistics Commands - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide

16. CPU Port Statistics Commands

16-1 debug show cpu port
This command is used to display statistics for Layer 2 or Layer 3 control packets that are trapped to the
CPU.
debug show cpu port [l2 | l3 [unicast | multicast] | protocol NAME]
Parameters
l2
l3
unicast
multicast
protocol NAME
Default
None.
Command Mode
Privileged EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
This command is use to display statistics for Layer 2 and Layer 3 control packets that are trapped to the
CPU.
Example
This example shows how to display all Layer 2 and Layer 3 protocol control packets that are trapped to
the CPU.
Switch# debug show cpu port
Type
-------------------------------
OSPFv2
OSPFv3
RIP
RIPng
LACP
802.1X
Stacking
GVRP
STP
CFM
(Optional) Specifies to display statistic counters of Layer 2 control
packets.
(Optional) Specifies to display statistic counters of Layer 3 control
packets.
Specifies to display statistic counters of Layer 3 unicast routing and
Layer 3 application control packets.
Specifies to display statistic counters of Layer 3 multicast routing
control packets.
(Optional) Specifies the name of protocol. It is case sensitive.
PPS Total
--------- ----------
0 0
0 0
0 0
0 0
0 0
0 0
0 810
0 0
0 0
0 0
298
Drop
-----------
0
0
0
0
0
0
0
0
0
0