Gvrp Forbidden - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
gvrp vlan create
no gvrp vlan create
Parameters
None.
Default
By default, this option is enabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
When dynamic VLAN creation is enabled, if a port has learned a new VLAN membership and the VLAN
does not exist, the VLAN will be created automatically. Otherwise, the newly learned VLAN will not be
created.
Example
This example shows how to enable the creation of dynamic VLANs registered with the GVRP protocol.
Switch# configure terminal
Switch(config)# gvrp vlan create
Switch(config)#

41-6 gvrp forbidden

This command is used to specify a port as being a forbidden member of the specified VLAN. Use the no
command to remove the port as a forbidden member of all VLANs.
gvrp forbidden {all | [add | remove] VLAN-ID [, | -]}
no gvrp forbidden
Parameters
all
add
remove
VLAN-ID [,|-]
,
Specifies that all VLANs, except VLAN 1, are forbidden on the
interface.
(Optional) Specifies a VLAN or a list of VLANs to be added to the
forbidden VLAN list.
(Optional) Specifies a VLAN or a list of VLANs to be removed from the
forbidden VLAN list.
(Optional) Specified the forbidden VLAN list. If the add or remove
option is not specified, the specified VLAN list will overwrite the
forbidden VLAN list. The range is 2 to 4094.
(Optional) Specifies a series of VLANs, or separate a range of VLANs
from a previous range. No spaces are required before and after the
518