Show Unit - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch#
Display Parameters
Power status

2-13 show unit

This command is used to display information about system units.
show unit [UNIT-ID]
Parameters
UNIT-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays information about the system modules. If no option is specified, then all of units'
information will be displayed.
Example
This example shows how to display the information about units on a system.
Switch# show unit
Unit
---- -------------------------------------------
1 24P tenGigabitEthernet
Unit
---- ---------------------------------
1 R3I21CA000119
Unit Memory
---- --------
1 DRAM
1 FLASH
Switch#
in-operation: The power rectifier is in normal operation.
failed: The power rectifier not working normally.
empty: The power rectifier is not installed.
(Optional) Specify the unit to display.
Model Descr
Serial-Number
Total Used
---------- ----------
2097152 K 744721 K
1048064 K 28070 K
Model Name
------------------
DXS-3600-32S
Status
--------- -----------------
ok 0DT0H0M51S
Free
----------
1352431 K
1019994 K
25
Up Time