Configuration
5.
Rev 3.01
Figure 3-45
Note
Obtain the appropriate Port Number for each RAS related
program (Admin, Watch, Search, and Callback) from your
network administrator.
Change the numbers by highlighting them and using the Up and Down Arrow
buttons or the Jog Dial to increase or decrease the number.
The factory default Port settings are:
Admin
Watch
Search
Callback
Note
The system restarts automatically after changing the port
settings.
Note
Do not use the same port number for two different programs;
otherwise, the DVR cannot be connected with a PC running RAS.
Port Number Setup Screen
8200
8016
10019
8201
64
Document 900.0258
10/05