Figure 3-24 Port Number Setup Screen - Honeywell HRSD40F User Manual

Configuration
5.
Caution
6.
Document 800-03097 Rev C
03/09
Figure 3-24
Note You need to get the appropriate Port Number for each RASplus-
and WebGuard-related program (Admin, Watch, Search,
Callback, and Audio) from your network administrator.
Change the number by highlighting it and using the Up and Down arrows to
increase or decrease the number.
The factory default Port settings are:
Remote Admin:
Remote Callback:
Remote Watch:
Remote Search:
Remote Audio:
Note The system restarts automatically after changing the port
settings.
Note Do NOT use the same port number for two different programs.
Otherwise, the DVR cannot be connected with a PC running
RASplus or WebGuard.
When changing the port settings, you must change the port
settings on a PC running RASplus or WebGuard as well. Refer to
the RASplus manual for details.
Save your changes and return to the Network Setup screen by highlighting OK
and pressing . Select Cancel to exit the screen without saving the changes.
Port Number Setup Screen
8200
8201
8016
10019
8116
59