Table of Contents
Advertisement
Configuration
4.
5.
6.
Software Upgrade
In the System Information Change screen, the box beside Version displays the software
version of the DVR.
To upgrade the software:
1.
2.
Rev 3.01
Press
to delete entered characters.
After you have entered your title, highlight Close and then press # .
Highlight the box beside Unit ID and then press # .
Change the number by highlighting it and using the Up and Down Arrow buttons
or the Jog Dial to increase and decrease the number. The Unit ID number is used
to identify the unit when it is networked with other DVRs.
Note
You cannot use the same number for two or more DVRs that are
within the same network.
Highlight the box beside Language and press # . A drop-down list displays the
available languages. Highlight the desired language and then press # .
After you have created a title, assigned a unit ID number, and selected a
language, you can save your changes by highlighting OK and pressing # . Select
Cancel to exit the screen without saving the changes.
Note
You can upgrade the software only in the System Information
Change screen.
Connect the USB device containing the upgrade package file to the DVR.
Highlight Upgrade ... and then press # . The System Upgrade screen displays,
showing the upgrade package file name.
27
Document 900.0258
10/05
Advertisement
Table of Contents
