Table of Contents
Advertisement
Configuration
Caution
6.
LAN Setup - DHCP
To set up a LAN (DHCP) connection:
1.
2.
LAN Setup - ADSL
To set up a LAN ADSL connection:
1.
2.
Rev 3.01
When you change the port settings you must also change the port
settings on a PC running RAS. Refer to the RAS User Guide for
detailed information.
To save your changes and return to the Network Setup screen, highlight OK and
then press # . Select Cancel to exit the screen without saving the changes.
On the LAN Setup screen, highlight the box beside Type, then press # .
Select DHCP, then highlight OK.
The system reads the current IP address of the DVR configured by DHCP
(Dynamic Host Configuration Protocol) network.
Figure 3-46
Note
You cannot configure ADSL and modem at the same time. If the
DVR is networked via modem, the ADSL (PPPoE) option will not
be selected.
On the LAN Setup screen, highlight the box beside Type, then press # .
Select ADSL (PPPoE), then highlight OK.
LAN (DHCP) Setup Screen
65
Document 900.0258
10/05
Advertisement
Table of Contents
