Table of Contents
Advertisement
Configuration
Caution
1.
2.
3.
4.
5.
6.
Rev 3.01
If you set a date and time that is older than some of your recorded
images, any images with dates and times later than the new
setting will be deleted.
Highlight the first box beside Date/Time and then press # . The individual sections
of the date highlight.
Use the Up and Down Arrow buttons or the Jog Dial to change the number. Use
the Left and Right Arrow buttons to move between month, day and year.
After you have the correct date, press # .
Highlight the second box beside Date/Time and press # . The individual sections
of the time will highlight. Use the Up and Down Arrow buttons or the Jog Dial to
change the number. Use the Left and Right Arrow buttons to move between hour,
minutes and seconds. After you have the correct time, press # .
Note
The clock will not start running until you have restarted the unit,
so you may wish to set the time last.
Highlight the box beside Time Zone and press # . Select the time zone you are in
from the list and press # .
Highlight the box beside Daylight Saving Time and press # . Pressing # toggles
between On and Off.
Highlight the Holiday Setup... box and press # . You can set up holidays by
highlighting Add ... and pressing # . The current date displays.
Highlight the month and day and change them by using the Up and Down Arrow
buttons. Press # to add the date. Dates can be deleted by highlighting the X
beside the date and pressing # .
Note
Holidays that do not fall on the same date each year should be
updated after the current year's holiday has passed.
29
Document 900.0258
10/05
Advertisement
Table of Contents
