Table of Contents
Advertisement
Configuration
Please refer to the
information on how to review video clips.
Caution
Rev 3.01
Note
You cannot end the clip copy process during CD burning.
Remote Administration System (RAS) User Guide
Note
During clip copy, you cannot change the system date and time,
shut the system down, switch to the Quick Setup mode, clear all
data, or change the system setup from a remote site.
Do NOT disconnect the USB cable or the power from the external
drive while copying clips. If the external drive is shut down or the
USB cable is disconnected while copying clips, the DVR system
may not work normally or the external drive could be
damaged, and you will get an error message the next time you try
to copy clips. You will need to power down the DVR and restart it
to get rid of the error message. After the file system of the
USB-IDE hard disk drive has been corrupted, this error message
cannot be dismissed. Even after restarting the DVR, it may
automatically restart while preparing a clip copy. You must
recover the file system using the recovery program, or you must
reformat the hard disk drive.
79
for detailed
Document 900.0258
10/05
Advertisement
Table of Contents
