Connecting The Video Source; Connecting The Loop Through Video; Figure 2-3 Video Input Connectors; Figure 2-4 Video Loop Through Connectors - Honeywell HRHD4+ User Manual

Installation

Connecting the Video Source

Connect the coaxial cables from the video sources to the BNC Video In connectors.

Connecting the Loop Through Video

If you would like to connect your video source to another device, you can use the Loop
BNC connectors.
Rev 3.01
Figure 2-3 Video Input Connectors
Figure 2-4 Video Loop Through Connectors
Note The Loop BNC connectors are auto terminated. Do not connect
a cable to the Loop BNC unless it is connected to another
terminated device because it will cause poor quality video.
7 Document 900.0258
10/05