Table of Contents
Advertisement
Configuration
Camera Setup Screen
Use the Camera Setup screen to display camera inputs, hide the video, assign titles,
and control PTZ cameras. Highlight Camera in the Device menu (MENU
Camera) and then press # . The Camera Setup screen displays.
The Camera setup screen displays the camera inputs in groups of four: 1-4, 5-8, 9-12,
and 13-16.
1.
2.
3.
Rev 3.01
Figure 3-17
You can turn the camera number On or Off, and also hide the video of the camera
number by highlighting the Camera and then pressing # . To change the settings
for all the cameras on the page (for example, cameras 1 to 4 as shown in
3-17), highlight the camera Setup heading and then press # . Select from
Figure
the following options in the drop-down list:
On, Off, Covert 1, Covert 2
Note
When you select Covert 1, the DVR displays the camera title and
status icons on the covert video. When you select Covert 2, the
DVR displays only the camera title on the covert video.
To assign titles to each camera, highlight the Title heading and then press # . A
virtual keyboard (see
Figure
3-7.
Selecting the PTZ Device box causes a list of controllable cameras to display.
Select your camera from the list and then press # . You must connect the camera
to the RS485 terminal on the back of the DVR following the camera manufacturer's
instructions.
Camera Setup Screen
Figure
3-7) allows you to enter camera names. See
37
Device
Document 900.0258
10/05
Advertisement
Table of Contents
