Table of Contents
Advertisement
Configuration
LAN Setup Screen
Use the LAN Setup screen (MENU
configure your Local Area Network.
1.
LAN Setup - Manual
2.
3.
4.
Rev 3.01
Figure 3-44
Highlight the box beside Type and then press # to select from Manual, DHCP, or
ADSL (PPPoE).
Selecting Manual allows you to set up LAN parameters manually.
Note
Obtain the appropriate IP Address, Gateway, and Subnet Mask,
from your network administrator.
Change the numbers by highlighting them and using the Up and Down Arrow
buttons or the Jog Dial to increase or decrease the number.
The factory default LAN settings are:
IP Address
Gateway
Subnet Mask
Highlight the box beside DNS Server and then press # to enter the IP address of
the DNS server. If you set up the DNS Server, the domain name of the DVRNS
server can be used instead of the IP address during the DVRNS Server setup (see
DVRNS (DVR Name Service) Setup
Highlight the box beside Port Number ... and then press # . The Port Numer
Setup screen displays.
Network
LAN Setup Screen
192.168.1.129
192.168.1.254
255.255.255.0
Screen, page
63
Network Setup
LAN) to
68
for more details).
Document 900.0258
10/05
Advertisement
Table of Contents
