Honeywell HRHD4+ User Manual page 93

Configuration
Caution
3.
4.
Rev 3.01
To change the password, highlight the Password box and then press # . A
window displays asking you to enter the current password. If you enter the correct
password, another window displays asking you to enter a new password using
the camera buttons. After you press # , another screen displays asking you to
confirm the new password.
Note The Admin and User passwords are composed of up to eight
digits using the camera buttons. The default User password is
1234, and Admin password is 4321.
Write down the new password and save it in a secure place. If the
password is forgotten, the unit must be reset using the Factory
Reset Button and all data settings will be lost.
To lock front panel buttons, highlight Key Lock On and then press # . After the
buttons are locked, pressing any front panel button will cause a password screen
to display.The Administrator and User passwords are used to unlock the keys.
To save your changes, highlight OK and then press # . Select Cancel to exit the
screen without saving the changes.
73 Document 900.0258
10/05