Xstatus Video Input Mainvideosource; Xstatus Video Input Source [1; Video Status; Xstatus Video Input - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

Video status

xStatus Video Input

Shows the top level overview of the video input status.

xStatus Video Monitors

Returns the monitor layout mode.
Single: The same layout is shown on all monitors.
Dual: The layout is distributed on two monitors.
DualPresentationOnly: All participants in the call will be shown on the first monitor, while the
presentation (if any) will be shown on the second monitor.
Quadruple: The layout is distributed on four monitors, so that each remote participant and the
presentation will be shown on separate monitors.
Value space of the result returned:
<Single/Dual/DualPresentationOnly/Triple/Quadruple>
Example:
xStatus Video Monitors
*s Video Monitors: Single
** end

xStatus Video Input LastConnectedSource

Shows the last connected video input source.
Value space of the result returned:
<1..1>
Example:
xStatus Video Input LastConnectedSource
*s Video Input LastConnectedSource: 0
** end
SX20 Codec API Reference Guide TC7.0, JANUARY 2014.
D14949.08
About the API xConfiguration

xStatus Video Input MainVideoSource

xStatus Video Input Source [1..3] Resolution Height
xStatus Video Input Source [1..3] Resolution Width
xStatus Video Input Source [1..3] Resolution RefreshRate
182
xCommand
Returns the local video input currently used as the main source. The main video source is set with
the xConfiguration Video Input VideoMainSource command.
Value space of the result returned:
<Integer>
Example:
xStatus Video Input MainVideoSource
*s Video Input MainVideoSource: 1
** end
Shows the resolution height (in pixels) for the video input source.
Value space of the result returned:
<0..3000>
Example:
xStatus Video Input Source 1 Resolution Height
*s Video Input Source 1 Resolution Height: 1080
** end
Shows the resolution width (in pixels) for the video input source.
Value space of the result returned:
<0..4000>
Example:
xStatus Video Input Source 1 Resolution Width
*s Video Input Source 1 Resolution Width: 1920
** end
Shows the resolution refresh rate (Hz) for the video input source.
Value space of the result returned:
<0..300>
Example:
xStatus Video Input Source 1 Resolution RefreshRate
*s Video Input Source 1 Resolution RefreshRate: 50
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2014 Cisco Systems, Inc. All rights reserved.