Cisco TelePresence SX20 Codec Reference Manual page 87

Cisco TelePresence SX20 Codec
Contents Introduction
xCommand CallHistory Get
Retrieve all information on previous calls made on the video system.
Filter: You can filter which calls to retrieve; either all, missed, placed or received calls.
Offset: Sets the call from which to start.
Limit: Defines the amount of calls in the output.
DetailLevel: Sets the level of detail for the information on these calls.
SearchString: Allows you to set the command to apply to a specified display name or call back
number.
CallHistoryId: CallHistoryId for the call in question.
Requires user role: USER
Parameters:
Filter(o): <All/Missed/Placed/Received/UnacknowledgedMissed>
Offset(o): <0..65534>
Limit(o): <0..65534>
DetailLevel(o): <Basic/Full>
SearchString(o): <S: 0, 255>
CallHistoryId(o): <0..65534>
Example:
xCommand CallHistory Get Filter: All Offset: 3 DetailLevel: Basic
*r CallHistoryGetResult Entry 0 CallHistoryId: 2
*r CallHistoryGetResult Entry 0 CallbackNumber: "sip:room1@company.com"
*r CallHistoryGetResult Entry 0 DisplayName: "display.name"
*r CallHistoryGetResult Entry 0 StartTime: "2013-04-09T10:56:36"
*r CallHistoryGetResult Entry 0 DaysAgo: 182
*r CallHistoryGetResult Entry 0 OccurrenceType: Received
*r CallHistoryGetResult Entry 0 IsAcknowledged: Acknowledged
*r CallHistoryGetResult Entry 1 CallHistoryId: 1
*r CallHistoryGetResult Entry 1 CallbackNumber: "sip:name@company.com"
*r CallHistoryGetResult Entry 1 DisplayName: "name"
*r CallHistoryGetResult Entry 1 StartTime: "2013-04-09T10:53:53"
*r CallHistoryGetResult Entry 1 DaysAgo: 182
*r CallHistoryGetResult Entry 1 OccurrenceType: Received
*r CallHistoryGetResult Entry 1 IsAcknowledged: Acknowledged
*r CallHistoryGetResult ResultInfo Offset: 3
*r CallHistoryGetResult ResultInfo Limit: 65534
** end
SX20 Codec API Reference Guide TC7.0, JANUARY 2014.
D14949.08
About the API xConfiguration
xCommand CallHistory Recents
87
xCommand xCommand
Retrieve aggregated information on previous calls made on the video system.
Filter: You can filter which calls to retrieve; either all, missed, placed or received calls.
Offset: Sets the call from which to start.
Limit: Defines the amount of calls in the output.
DetailLevel: Sets the level of detail for the information on these calls.
SearchString: Allows you to set the command to apply to a specified display name or call back
number.
CallHistoryId: CallHistoryId for the call in question.
Requires user role: USER
Parameters:
Filter(o): <All/Missed/Placed/Received/UnacknowledgedMissed>
Offset(o): <0..65534>
Limit(o): <0..65534>
DetailLevel(o): <Basic/Full>
SearchString(o): <S: 0, 255>
CallHistoryId(o): <0..65534>
Example:
xCommand CallHistory Recents Filter: Missed Offset: 6 DetailLevel: Full
*r CallHistoryRecentsResult ResultInfo Offset: 6
*r CallHistoryRecentsResult ResultInfo Limit: 65534
** end
API Reference Guide
xStatus Appendices
Copyright © 2014 Cisco Systems, Inc. All rights reserved.