Cisco TelePresence SX20 Codec
Contents
Introduction
xStatus SystemUnit Notifications Notification [n] Text
Lists text related to important system notifications. Notifications are issued e.g. when a system was
rebooted because of a software upgrade, or when a factory reset has been performed.
All the notifications can be removed from the list by issuing the xCommand SystemUnit Notifications
RemoveAll command.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Notifications Notification 1 Text
*s SystemUnit Notifications Notification 1 Text: "OK"
** end
xStatus SystemUnit Diagnostics LastRun
Shows when the SystemUnit diagnostics was last run on the codec.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Diagnostics LastRun
*s SystemUnit Diagnostics LastRun: "2012-08-17, 16:23:27"
** end
xStatus SystemUnit Diagnostics Message Type
Returns information on the results of the latest diagnostics on the system.
Value space of the result returned:
<ValidAdminPassword/CamerasDetected/H320GatewayStatus/ISDNLinkCompatibility/
SIPProfileRegistration/SIPListenPortAndOutboundMode/TLSVerifyRequiredCerts/
DefaultCallProtocolRegistered/NetSpeedAutoNegotiated/HasValidReleaseKey/
EthernetDuplexMatches/IPv4Assignment/IPv6Assignment/SIPProfileType/
CallProtocolIPStackPlatformCompatability/CameraStatus/CameraPairing/
CameraSoftwareVersion/SelectedVideoInputSourceConnected/OSDVideoOutput/
VideoFromInternalCamera/H323GatekeeperStatus/SipIceAndAnatConflict/
UdpPortRangeViolation/ProvisioningStatus/CallProtocolVcsProvisioningCompatibility/
CallProtocolDualStackConfig>
Example:
xStatus SystemUnit Diagnostics Message type
*s SystemUnit Diagnostics Message 1 Type: InvalidAdminPassword
** end
SX20 Codec API Reference Guide TC7.0, JANUARY 2014.
D14949.08
About the API
xConfiguration
xStatus SystemUnit Diagnostics Message Level
xStatus SystemUnit Diagnostics Message Description
xStatus SystemUnit Diagnostics Message References
180
xCommand
Returns information on the level of the diagnostics message.
Error: There is an error in the system. The system can still be used, but there can be some
restrictions.
Warning: A problem is detected and a more specific report follows indicating the exact problem.
Critical: The warning level is critical. The system cannot be used.
Value space of the result returned:
<Error/Warning/Critical>
Example:
xStatus SystemUnit Diagnostics Message Level
*r Status (status=Error):
Reason: No match on address expression
XPath: Status/SystemUnit/Diagnostics/Message/Level
** end
A description of the current diagnostics alerts.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Diagnostics Message Description
*s SystemUnit DiagnosticsResult Message 1 Description: "IP configuration
incomplete"
** end
Additional information on the diagnostics alert, if available.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Diagnostics Message References
*s SystemUnit DiagnosticsResult Message 1 References: ""
** end
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2014 Cisco Systems, Inc. All rights reserved.