Cisco TelePresence SX20 Codec Reference Manual page 89

Cisco TelePresence SX20 Codec
Contents Introduction
xCommand CallLog Missed Dismiss
Review the call log of dismissed calls. If a logtag is given as argument, that specific call is deleted
from the log. If no logtag is given the system deletes the complete missed calls log. The LogTag
values for missed calls are found by issuing the xHistory CallLog Missed command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Missed Dimissed LogTag:119
*r DismissResult (status=OK):
** end
SX20 Codec API Reference Guide TC7.0, JANUARY 2014.
D14949.08
About the API xConfiguration
CamCtrlPip commands
xCommand CamCtrlPip
89
xCommand xCommand
Show or hide the camera self-view in a small window (picture in picture).
Mode: Select whether the self-view picture in picture is on or off.
Duration: Set how long the self-view is shown for on screen.
Requires user role: USER
Parameters:
Mode(r): <On/Off>
Duration: <0..60>
Example:
xCommand CamCtrlPip Mode: On
*r CamCtrlPipResult (status=OK):
** end
API Reference Guide
xStatus Appendices
Copyright © 2014 Cisco Systems, Inc. All rights reserved.