Cisco TelePresence SX20 Codec Reference Manual page 104

Cisco TelePresence SX20 Codec
Contents Introduction
xCommand Phonebook ContactMethod Add
Add contact details for an existing contact in the local phonebook. The command returns the
ContactMethodId, which is a unique string that identifies the contact method; typically the format is
"n".
You can add several contact methods to a contact. Note that only the first contact method will
appear in the Favorites list on the Cisco TelePresence Touch controller. The first contact method
may have been created when issuing the xCommand Phonebook Contact Add command to make
the contact. All contact methods are available in the API, on the web interface and when using the
remote control.
ContactId: The unique identifier for the contact that you want to add a contact method to. The
identifier will be returned by an xCommand Phonebook Search command. It was also returned when
the xCommand Phonebook Contact Add command was issued to make the contact.
Device: Set which type of device to call to.
Number(r): The phone number or address of the contact.
Protocol: Select Auto, SIP, H323 or H320 protocol.
CallRate: Set a call rate.
CallType: Select a call type (audio or video).
Requires user role: USER
Parameters:
ContactId(r): <S: 0, 255>
Device: <Mobile/Other/Telephone/Video>
Number(r): <S: 0, 255>
Protocol: <Auto/H320/H323/SIP>
CallRate: <0..6000>
CallType: <Audio/Video>
Example:
xCommand Phonebook ContactMethod Add ContactId:localContactId-2
Number:54321 Protocol:H323
OK
*r PhonebookContactMethodAddResult (status=OK):
Name: 1
** end
SX20 Codec API Reference Guide TC7.0, JANUARY 2014.
D14949.08
About the API xConfiguration
xCommand Phonebook ContactMethod Modify
104
xCommand xCommand
Modify details about the contact method for an existing contact in the local phonebook.
ContactId: The unique identifier for the contact. The identifier will be returned by an xCommand
Phonebook Search command. It was also returned when the xCommand Phonebook Contact Add
command was issued to make the contact.
ContactMethodId: The unique identifier for the contact method you want to modify. The identifier
will be returned by an xCommand Phonebook Search command. It was also returned when the
xCommand Phonebook ContactMethod Add or xCommand Phonebook Contact Add commands
were issued to make the contact method.
Device: Set which type of device to call to.
Number: The phone number or address of the contact.
Protocol: Select Auto, SIP, H323 or H320 protocol.
CallRate: Set a call rate.
CallType: Select a call type (audio or video).
Requires user role: USER
Parameters:
ContactId(r): <S: 0, 255>
ContactMethodId(r): <S: 0, 255>
Device: <Mobile/Other/Telephone/Video>
Number: <S: 0, 255>
Protocol: <Auto, H320/H323/SIP>
CallRate: <0..6000>
CallType: <Audio/Video>
Example:
xCommand Phonebook ContactMethod Modify ContactMethodId:117
ContactId:localContactId-10 Number:"newnumber@cisco.com"
OK
API Reference Guide
xStatus Appendices
Copyright © 2014 Cisco Systems, Inc. All rights reserved.