Cisco TelePresence SX20 Quick Set Administrator's Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Conference System
  5. TelePresence SX20
  6. Administrator's manual

Cisco TelePresence SX20 Quick Set Administrator's Manual

Software version tc5.1
Hide thumbs Also See for TelePresence SX20 Quick Set:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Troubleshooting Manual, Administrator's Manual
Cisco TelePresence SX20 Quick Set
Table of contents
Introduction
AdministrAtor guide
•
SX20 QUICK SET
Software version TC5.1
FEBRUARY 2012
D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved.
Web interface
Advanced settings
Appendices
1
www.cisco.com

Advertisement

Table of Contents
loading

Related Manuals for Cisco TelePresence SX20 Quick Set

Summary of Contents for Cisco TelePresence SX20 Quick Set

  • Page 1 Cisco TelePresence SX20 Quick Set Table of contents Introduction Web interface Advanced settings Appendices AdministrAtor guide • SX20 QUICK SET Software version TC5.1 FEBRUARY 2012 D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 2: Table Of Contents

    ClearPath — Packet loss resilience ........74 Technical specification for SX20 Quick Set .......75 Supported RFCs ..............78 User documentation on the Cisco web site .......79 D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 3: Introduction

    Cisco TelePresence SX20 Quick Set AdministrAtor guide Table of contents Introduction Introduction Web interface Advanced settings Appendices Chapter 1 Introduction D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 4: User Documentation

    You can download the software for your product from the Cisco web site, go to: http://www.cisco.com/cisco/software/navigator.html We recommend reading the Software Release Notes (TC5), go to: http://www.cisco.com/en/US/products/ps11424/tsd_ products_support_series_home.html D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 5: Cisco Telepresence Sx20 Quick Set At A Glance

    TelePresence Multiway™ technology, or the built in 4 way 4x zoom Cisco TelePresence MultiSite feature (no external bridge). SX20 Codec Remote control 1 microphone (+ 1 optional) D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 6: The Web Interface

    Cisco TelePresence SX20 Quick Set AdministrAtor guide Table of contents Introduction Web interface Web interface Advanced settings Appendices Chapter 2 The web interface D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 7: Starting The Web Interface

    Sign out Click on your user name and select Sign out from the drop down menu. D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 8: Changing The System/Codec Password

    If the password currently is not 4. Set the new password set, leave the Current password field blank. Press Change password the change to take effect. D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 9: The Interactive Menu

    The illustration lists all the sub-menus. A user not possessing all user roles will only see the sub-set relevant for his type of user. You can read more about user administration and user roles in the User administration section. D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 10: The System Information

    Information about system name, Information about recent login product type, software version, attempts and password expiry. IP address, etc. Diagnostics System Information Log Files XML Files D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 11: Log Files

    You can also download all log files as a bundle; click the corresponding link on the web page and follow the instructions. Diagnostics System Information Log Files XML Files D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 12: Xml Files

    Diagnostics System Information Log Files XML Files D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 13: Advanced Configuration

    The system settings are structured in several categories. Select a category to display the related settings to the right. Configuration Advanced Configuration Wallpaper Sign In Banner D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 14: Selecting A Wallpaper

    The selected wallpaper is The custom wallpaper is selected highlighted. automatically upon upload. Configuration Advanced Configuration Wallpaper Sign In Banner D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 15: Sign In Banner

    Save Sign In Banner to activate it. Configuration An active sign in banner Advanced Configuration The sign in banner is displayed here. Wallpaper Sign In Banner D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 16: Placing A Call

    To stop the content sharing, press the Stop Presentation button that becomes visible while sharing. Call Control D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 17: Controlling And Monitoring A Call

    Call bit rate Hide details removes the information. Call protocol Camera control Call Control D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 18: Local Layout Control

    4:3 or 16:9. Select a layout Select your preferred layout in the drop down menu. You may change the layout while in a call. Call Control D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 19: Capturing Snapshots

    Live snapshots box is checked, snapshots are captured by your video system (main camera and presentation) approximately every two seconds. Snapshots from your video system Call Control D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 20: Upgrading The System Software

    If you want to continue working with the web interface Restart option key, repeat step ii you must re-establish the connection and sign in for all of them. Factory Reset anew. D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 21: Certificate Management

    4. Press Upload to store the certificate on your Maintenance system. Software Upgrade Certificate Management Audit Certificate User Administration Restart Factory Reset D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 22: The Audit Certificate List

    Select ExternalSecure from the Logging Mode drop down list. Maintenance Software Upgrade Certificate Management Audit Certificate User Administration Restart Factory Reset D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 23: User Administration

    Restart Factory Reset Software upload from TMS, web snapshots and making calls from the web interface are prohibited in strong security mode. D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 24: Administrator Guide

    Software Upgrade Certificate Management NOTE: Always keep at least one user with ADMIN rights Audit Certificate Active. User Administration Restart Factory Reset D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 25: Restarting The System

    To restart the system, press Restart now. Restarting the system takes a few minutes. Maintenance Software Upgrade Certificate Management Audit Certificate User Administration Restart Factory Reset D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 26: Factory Reset

    Wait while the system resets. The system will reboot automatically when finished. Maintenance Software Upgrade Certificate Management Audit Certificate User Administration Restart Factory Reset D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 27: The Advanced Settings

    Cisco TelePresence SX20 Quick Set AdministrAtor guide Table of contents Introduction Web interface Advanced settings Advanced settings Appendices Chapter 3 The advanced settings D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 28: Overview Of The Advanced Settings

    Network [1..1] IEEE8021X Eap Tls ..................43 Conference [1..1] MaxTransmitCallRate ................. 35 Network [1..1] IEEE8021X Eap Ttls ..................43 Conference [1..1] MicUnmuteOnDisconnect Mode ..............34 D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 29 NetworkServices SSH AllowPublicKey ................... 47 SIP Profile [1..1] Type ......................55 NetworkServices SSH Mode ....................47 SIP Profile [1..1] URI ....................... 54 NetworkServices Telnet Mode....................47 D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 30 Video MainVideoSource ......................63 Video Monitors ........................63 Video OSD AutoSelectPresentationSource ................63 Video OSD InputMethod Cyrillic ..................... 64 Video OSD InputMethod InputLanguage ................64 D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 31: The Audio Settings

    Range: The value goes in steps of 5 from 0 to 100 (from -34.5 dB to 15 dB). Volume 0 = Off. Example: Audio SoundsAndAlerts RingVolume: 50 D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 32: The Cameras Settings

    Example: Cameras Camera 1 Gamma Mode: Auto Value space: <1..31> Range: Select a value from 1 to 31. Example: Cameras Camera 1 Brightness Level: 1 D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 33 Manual: Enables manual control of the camera whitebalance, e.g. the level of the whitebalance level setting will be used for the camera. Example: Cameras Camera 1 Whitebalance Mode: Auto D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 34: The Conference Settings

    On: Un-mute the microphones after the call is disconnected. Off: If muted, let the microphones remain muted after the call is disconnected. Example: Conference 1 MicUnmuteOnDisconnect Mode: On D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 35 Range: Select a value between 64 and 6000 kbps. Value space: <1..10> Example: Conference 1 MaxTransmitCallRate: 6000 Range: 1 to 10. Example: Conference 1 VideoBandwidth PresentationChannel Weight: 5 D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 36 MultiWay takes priority over MultiSite. If neither MultiWay nor MultiSite is available, the multipoint mode is set to Off automatically. Example: Conference 1 Multipoint Mode: Auto D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 37: The Facilityservice Settings

    Requires user role: ADMIN Value space: <S: 0, 255> Format: String with a maximum of 255 characters. Example: FacilityService Service 1 Name: "" D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 38: The H323 Settings

    Requires the H.323 Gatekeeper Authentication Mode to be enabled. Requires user role: ADMIN Value space: <S: 0, 50> Format: String with a maximum of 50 characters. Example: H323 Profile 1 Authentication Password: D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 39 (192.a.2.0) or unvalid IP addresses (192.0.1234.0) will be rejected. Example: H323 Profile 1 PortAllocation: Dynamic Example: H323 Profile 1 Gatekeeper Address: "192.0.2.0" D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 40: The Network Settings

    IPv6: IP version 6 is supported. The IPv4 settings (IP Address, IP Subnet Mask and Gateway) will be disabled. Example: Network 1 IPStack: IPv4 D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 41 Diffserv: When you set the QoS Mode to Diffserv you must configure the Diffserv sub menu settings (Audio, Data, Signalling and Video). Example: Network 1 QoS Mode: diffserv D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 42 TLS connections. Only servers with a valid certificate will be allowed. Format: String with a maximum of 64 characters. Example: xConfiguration Network 1 IEEE8021X TlsVerify: Off Example: Network 1 IEEE8021X AnonymousIdentity: "" D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 43 On: The EAP-PEAP protocol is enabled (default). Example: Network 1 RemoteAccess Allow: "192.168.1.231, 192.168.1.182" Off: The EAP-PEAP protocol is disabled. Example: Network 1 IEEE8021X Eap Peap: On D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 44 Set the VLAN voice ID. This setting will only take effect if VLAN Voice Mode is set to Manual. Requires user role: ADMIN Value space: <1..4094> Range: Select a value from 1 to 4094. Example: Network 1 VLAN Voice VlanId: 1 D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 45: The Networkservices Settings

    (CA). This requires that a list of trusted CAs are uploaded to the system in advance. Off: Do not verify client certificates. Example: NetworkServices HTTPS VerifyClientCertificate: Off D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 46 Example: NetworkServices NTP Mode: Manual Requires user role: ADMIN Value space: <S: 0, 64> Format: String with a maximum of 64 characters. Example: NetworkServices SNMP Host 1 Address: "" D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 47 Requires user role: ADMIN Value space: <On/Off> On: The SSH protocol is enabled. Off: The SSH protocol is disabled. Example: NetworkServices SSH Mode: On D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 48: The Phonebook Settings

    Enter the address (URL) to the external phonebook server. Requires user role: ADMIN Value space: <S: 0, 255> Format: String with a maximum of 255 characters. Example: Phonebook Server 1 URL: "http://tms.company.com/tms/public/ external/phonebook/phonebookservice.asmx" D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 49: The Provisioning Settings

    Provisioning Mode is Callway, enter the video number. Requires user role: ADMIN Value space: <S: 0, 80> Format: String with a maximum of 80 characters. Example: Provisioning LoginName: "" D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 50 Enter the SIP domain for the VCS provisioning server. Requires user role: ADMIN Value space: <S: 0, 64> Format: String with a maximum of 64 characters. Example: Provisioning ExternalManager Domain: "any.domain.com" D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 51: The Rtp Settings

    Specify the last RTP port in the range. See also the "H323 Profile [1..1] PortAllocation" command. Requires user role: USER Value space: <1056..65535> Range: Select a value from 1056 to 65535. Example: RTP Ports Range Stop: 2486 D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 52: The Security Settings

    Range: Select a value from 0 to 10000 seconds. 0 means that inactivity will not enforce Example: Security Audit OnError Action: Ignore automatically logout. Example: Security Session InactivityTimeout: 0 D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 53: The Serialport Settings

    On: Login is required when connecting to the codec through COM 1 port. Off: The user can access the codec through COM 1 port without any login. Example: SerialPort LoginRequired: On D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 54: The Sip Settings

    Example: SIP Profile 1 Authentication 1 Password: Off: Connect to the single proxy configured first in Proxy Address list. Example: SIP Profile 1 Outbound: Off D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 55 Nortel: To be used when registering to Nortel MCS 5100 or MCS 5200 PBX. NOTE: This mode is not fully supported. Example: SIP Profile 1 Type: Standard D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 56: The Standby Settings

    DefaultCameraPosition: After a reboot the camera position will be set to the factory default position. Example: Standby BootAction: DefaultCameraPosition D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 57: The Systemunit Settings

    SipUri: Shows the SIP URI as the contact information. SystemName: Shows the system name as the contact information. Example: SystemUnit ContactInfo Type: Auto D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 58: The Time Settings

    Range: Select a time zone from the list time zones. If using a command line interface; watch up for typos. Example: Time Zone: "GMT (Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London)" D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 59: The Userinterface Settings

    ContactList: The contact list (favorites, directory and history) will appear as default on the Touch panel. MeetingList: The list of scheduled meetings will appear as default on the Touch panel. Example: UserInterface TouchPanel DefaultPanel: ContactList D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 60: The Video Settings

    Document_Camera: Select Document_Camera when you have a document camera connected to the selected video input. Example: Video Input Source 1 Type: PC D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 61 Rather high resolutions will be used. Example: Video DefaultPresentationSource: 2 Example: Video Input Source 1 OptimalDefinition Profile: Medium D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 62 NOTE: The general limitation is that you cannot upscale in one direction and at the same time downscale in the other direction. In such situations the codec will apply letterboxing. Example: Video Layout ScaleToFrame: MaintainAspectRatio D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 63 Off: The local contacts will be placed in a separate folder called MyContacts in the phonebook dialog. Example: Video OSD MyContactsExpanded: Off D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 64 Off: Cyrillic mode is NOT available as a menu input language in the menus on screen. Example: Video Output HDMI 1 CEC Mode: Off Example: Video OSD InputMethod Cyrillic: Off D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 65 Auto: The system will automatically try to set the optimal resolution based on negotiation with the connected monitor. Range: 1024x768@60p, 1280x1024@60p, 1280x720@60p, 1920x1080@60p, 1280x768@60p, 1360x768@60p, 1366x768@60p Example: Video Output HDMI 1 Resolution: 1920_1080_60 D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 66: The Experimental Settings

    Off: Forward error correction will NOT be used as part of the PacketLossResilience mechanism. Requires user role: ADMIN Value space: <On/Off> Example: Experimental Conference 1 PacketLossResilience ForwardErrorCorrection: On D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 67 NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change. Requires user role: ADMIN Value space: <Indicators/Full> Example: Experimental SystemUnit MenuType: Full D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 68 NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change. Requires user role: ADMIN Value space: <S: 0, 255> Example: Experimental SystemUnit CrashReporting URI: "" D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 69: Appendices

    Cisco TelePresence SX20 Quick Set AdministrAtor guide Table of contents Introduction Web interface Advanced settings Appendices Appendices Appendices D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 70: Setting The System Password

    5. Click Save. The password format is a string with 0–64 characters. 4. Click Change password. D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 71: Setting The Administrator Settings Menu Password

    (SSH or Telnet). 2. Type the following command: xCommand SystemUnit MenuPassword Set Password: <password> The password format is a string with 0–255 characters. D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 72: Setting A Root Password

    ADMIN rights. 3. Type the following command: systemtools rootsettings on <password> NOTE: The root password is not the same as the system (admin) password. D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 73: Optimal Definition Profiles

    High 512 × 288 1024 × 576 1280 × 720 1280 × 720 1920 × 1080 1920 × 1080 1920 × 1080 D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 74: Clearpath — Packet Loss Resilience

    PacketLossResilience > Mode. Select to disable ClearPath and select to enable ClearPath. We recommend that you keep ClearPath enabled on your video system. D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 75: Technical Specification For Sx20 Quick Set

    • 848 × 480 • Packet loss based downspeeding • 1024 × 768 • Uniform resource identifier (URI) dialing • 1152 × 864 • TCP/IP D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 76 • One LAN and Ethernet (RJ-45) • Upside-down mounting with manual flipping 10/100/1000 Mbps of picture Other interfaces • Two USB host for future use D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...
  • Page 77 All images in these materials are for representational purposes only, actual products may differ. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks.

  • Page 78: Supported Rfcs

    • RFC 3891 The SIP “Replaces” Header • RFC 3892 Referred-By Mechanism • RFC 3960 Early Media * Applies to Cisco TelePresece SX20 Quick Set only. D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 79: User Documentation On The Cisco Web Site

    Release and General Information | Licensing Information Video conferencing room guidelines: Design | Design Guides NOTE: All products do not have all types of user documentation. D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

  • Page 80: Table Of Contents Introduction Web Interface Advanced Settings Appendices

    Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental. TANDBERG is now a part of Cisco. TANDBERG® is a registered trademark belonging to Tandberg ASA. D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com...

Table of Contents