Cisco TelePresence SX20 Codec Reference Manual page 103

Cisco TelePresence SX20 Codec
Contents Introduction
xCommand Phonebook Contact Modify
Modify contact details of an existing contact in the local phonebook. The following parameters
can be changed using this command: Name, FolderId, ImageURL and Title. You must use the
xCommand Phonebook ContactMethod Modify command to change the other parameters: Number,
Protocol, CallRate, CallType and Device.
ContactId: The unique identifier for the contact you want to modify. The identifier will be returned by
an xCommand Phonebook Search command. It was also returned when the xCommand Phonebook
Contact Add command was issued to make the contact.
Name: The name of the contact.
FolderId: A unique identifier for the folder. The identifier will be returned by an xCommand
Phonebook Search command. It was also returned when the xCommand Phonebook Folder Add
command was issued.
ImageURL: Currently not in use.
Title: The title of the contact.
Requires user role: USER
Parameters:
ContactId(r): <S: 0, 255>
Name: <S: 0, 255>
FolderId: <S: 0, 255>
ImageURL: <S: 0, 255>
Title: <S: 0, 255>
Example:
xCommand Phonebook Contact Modify ContactId:localContactId-1 Name: "John
Doe - office"
OK
*r PhonebookContactModifyResult (status=OK):
** end
SX20 Codec API Reference Guide TC7.0, JANUARY 2014.
D14949.08
About the API xConfiguration
xCommand Phonebook Contact Delete
103
xCommand xCommand
Delete an existing contact from the local phonebook.
ContactId: The unique identifier for the contact. The identifier will be returned by an xCommand
Phonebook Search command. It was also returned when the xCommand Phonebook Contact Add
command was issued to make the contact.
Requires user role: USER
Parameters:
ContactId(r): <S: 0, 255>
Example:
xCommand Phonebook Contact Delete ContactId:localContactId-1
OK
*r PhonebookContactDeleteResult (status=OK):
** end
API Reference Guide
xStatus Appendices
Copyright © 2014 Cisco Systems, Inc. All rights reserved.