Cisco TelePresence SX20 Codec Reference Manual page 139

Cisco TelePresence SX20 Codec
Contents Introduction
xStatus Conference DoNotDisturb
Shows whether DoNotDisturb mode is switched on or not.
Value space of the result returned:
<Active/Inactive>
Example:
xStatus Conference DoNotDisturb
*s Conference DoNotDisturb: Inactive
** end
xStatus Conference ActiveSpeaker Mode
Shows whether the ActiveSpeaker mode is switched on or not.
Value space of the result returned:
<On/Off>
Example:
xStatus Conference ActiveSpeaker Mode
*s Conference ActiveSpeaker Mode: Off
** end
xStatus Conference ActiveSpeaker SiteId
Returns the SiteId (CallId) of the current active speaker.
Value space of the result returned:
<Integer>
Example:
xStatus Conference ActiveSpeaker SiteId
*s Conference ActiveSpeaker SiteId: 0
** end
xStatus Conference SelectedCallProtocol
Indicates which call protocol is used as default.
Value space of the result returned:
<H323/SIP/H320>
Example:
xStatus Conference SelectedCallProtocol
*s Conference SelectedCallProtocol: SIP
** end
SX20 Codec API Reference Guide TC7.0, JANUARY 2014.
D14949.08
About the API xConfiguration
Diagnostics status
xStatus Diagnostics
xStatus Diagnostics Call [n] Channels IncomingAudioChannel [n] Netstat 1 Jitter
xStatus Diagnostics Call [n] Channels IncomingVideoChannel [n] Netstat 1 Jitter
xStatus Diagnostics Call [n] Channels IncomingDataChannel [n] Netstat 1 Jitter
xStatus Diagnostics Call [n] Channels OutgoingAudioChannel [n] Netstat 1 Jitter
xStatus Diagnostics Call [n] Channels OutgoingVideoChannel [n] Netstat 1 Jitter
xStatus Diagnostics Call [n] Channels OutgoingDataChannel [n] Netstat 1 Jitter
139
xCommand
Shows the top level overview of the diagnostics. The example shows the status for an ongoing call.
The identities of the call and channels are used when querying additional information.
Shows the jitter at the present moment in the incoming/outgoing channel, as specified by RFC
3550.
Value space of the result returned:
<Integer>
Example:
xStatus Diagnostics Call 27 Channels OutgoingDataChannel 327 Netstat 1
Jitter
*s Diagnostics Call 27 Channels OutgoingDataChannel 327 Netstat 1 Jitter:
0
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2014 Cisco Systems, Inc. All rights reserved.