Cisco TelePresence System Profile Series Quick Reference Manual

Quick Reference Guide
Software version TC 6.0—January 2013
ISO A4 Version
Basic operating principles
Tap screen to Tap a button to
wake up system. activate its function.
Calling someone using their number
Tap Key in the number,
Dialpad. as outlined.
Switching between dialpad and keyboard
Tap ABC... This is the
alphanumerical
keyboard. To insert a
digit tap and hold the
corresponding key,
or tap 123 to switch
to numeric mode, as
outlined.
Calling someone using the lists of Contacts
Tap Contacts... Search or scroll through
the any of the lists, see
overleaf for details.
Calling more than one (MultiSite)
Place a call to the
first participant.
Scroll in the
lists, as outlined.
Tap Add to place
the second
call, initiating a
conference.
Tap Call to place
Calling more than one (MultiWay
the call.
Place a call to the
first participant.
This is the keyboard
in numerical mode.
If you prefer the
dialpad instead, tap
anywhere outside
Tap Add to place
the keyboards, as
the second
outlined.
call, initiating a
conference.
Receiving an incoming call while already in a call
Tap Call to place
the call.
Cisco TelePresence Systems Profile Series / Codecs C Series / SX20 Quick Set / Quick Set C20 / MX200 / MX300 TC6.0—January 2013
Once you Then call the next
are in the call, participant in the
tap Add. usual way.
To add Tap END to
more participants, terminate the
tap Add again. conference.
)
™
To add Then call the next
another, tap Hold (a) participant in the
followed by Add (b). usual way.
To add Tap END to
another, tap Hold (a) terminate the
followed by Add (b), as conference.
outlined above.
You may:
ACCEPT & MERGE (MultiSite)
DECLINE (all configurations)
Accept & Hold Current
(MultiSite/MultiWay)
Accept & End Current
(all configurations)
Ignore (all configurations)
Transferring an ongoing call
Tap as outlined to Tap Transfer, as
invoke the Transfer outlined, then call
dialog box. someone else in the
usual way
Call swapping
Tap Hold, as Tap + Place New
outlined. Call as outlined,
then place a call in
the usual way.
Layout control in a call
To select a different
layout, tap Layout
and then tap the new
preferred layout.
What you see is what
you get.
Tap the dots, as
outlined, to switch
between graphical
and tabulated
presentation of the
participants.
Tap as outlined during
a call to add self-view
to your screen (this
will not be seen by the
remote participants).
Tap and hold the
self-view icon. When
it turns blue drag it
to a new position, as
outlined.
Tap TRANSFER,
as outlined.
Tap Swap to go
between the two
parties.