Cisco TelePresence SX20 Codec Reference Manual page 37

Cisco TelePresence SX20 Codec
Contents Introduction
xConfiguration Conference [1..1] IncomingMultisiteCall Mode
Select whether or not to allow incoming calls when already in a call/conference.
Requires user role: ADMIN
Value space: <Allow/Deny>
Allow: You will be notified when someone calls you while you are already in a call. You can accept
the incoming call or not. The ongoing call may be put on hold while answering the incoming call; or
you may merge the calls (requires MultiSite or MultiWay support).
Deny: An incoming call will be rejected if you are already in a call. You will not be notified about the
incoming call. However, the call will appear as a missed call in the call history list.
Example: xConfiguration Conference 1 IncomingMultisiteCall Mode: Allow
SX20 Codec API Reference Guide TC7.0, JANUARY 2014.
D14949.08
About the API xConfiguration xConfiguration
FacilityService configuration
xConfiguration FacilityService Service [1..5] Type
xConfiguration FacilityService Service [1..5] Name
37
xCommand
Up to five different facility services can be supported simultaneously. With this setting you
can select what kind of services they are. A facility service is not available unless both the
FacilityService Service Name and the FacilityService Service Number settings are properly set.
Only FacilityService Service 1 with Type Helpdesk is available on the Touch screen control panel.
Note that the facility services are not available when using the remote control and on-screen menu.
Requires user role: ADMIN
Value space: <Other/Concierge/Helpdesk/Emergency/Security/Catering/Transportation>
Other: Select this option for services not covered by the other options.
Concierge: Select this option for concierge services.
Helpdesk: Select this option for helpdesk services.
Emergency: Select this option for emergency services.
Security: Select this option for security services.
Catering: Select this option for catering services.
Transportation: Select this option for transportation services.
Example: xConfiguration FacilityService Service 1 Type: Helpdesk
Enter the name of the facility service. Up to five different facility services are supported. A facility
service is not available unless both the FacilityService Service Name and the FacilityService Service
Number settings are properly set. Only FacilityService Service 1 is available on the Touch screen
control panel, and the name will show on the facility service call button. The facility services are not
available when using the remote control and on-screen menu.
Requires user role: ADMIN
Value space: <S: 0, 255>
Format: String with a maximum of 255 characters.
Example: xConfiguration FacilityService Service 1 Name: ""
API Reference Guide
xStatus Appendices
Copyright © 2014 Cisco Systems, Inc. All rights reserved.