Linksys SPA9000-NA Installation And Configuration Manual page 64

Typical Outbound Call Routing Examples
ITSP Only: The system has an ITSP service connected to Line 1 only . The user (in USA) would like
•
to press 9 to dial outbound (default configuration) .
Call Routing Rule: (<:L1>9xx.)
Phone dial plan (US): (9,[3469]11S0|9,<:1408>[2-9]xxxxxx|9,<:1>[2-9]
xxxxxxxxxS0|9,1[2-9]xxxxxxxxxS0|9,011xx.|9,xx.|[1-8]xx)
Line 1 Dial plan: (<9:>xx.)
ITSP and PSTN Service:
•
connected to Line 2 for PSTN services . The user (in USA) would like to press 9 for Line 1 and to
press 8 for Line 2 to make outbound calls .
Call Routing Rule: (<:L1>9xx.|<:L2>8xx.)
Phone dial plan (US): ([89],[3469]11S0|[89],<:1408>[2-9]
xxxxxx|[89],<:1>[2-9]xxxxxxxxxS0|[89],1[2-9]xxxxxxxxxS0|[89],011xx.|
[89],xx.|[1-8]xx)
Line 1 Dial plan: (<9:>xx.)
Line 2 Dial plan: (<8:>xx.)
ITSP and PSTN with Backup Line:
•
SPA400 connected to Line 2 for PSTN services . The user (in USA) would like to press 9 for Line 1
and to press 8 for Line 2 to make outbound calls . In addition, in case of broadband failure, the user
would like to route all calls to the PSTN services (Line 2 used also as backup line of Line 1) .
Call Routing Rule: (<:L1,2>9xx.| <:L2>8xx.)
Phone dial plan (US): ([89],[3469]11S0|[89],<:1408>[2-9]
xxxxxx|[89],<:1>[2-9]xxxxxxxxxS0|[89],1[2-9]xxxxxxxxxS0|[89],011xx.|
[89],xx.|[1-8]xx)
Line 1 Dial plan: (<9:>xx.)
Line 2 Dial plan: (<8:>xx.|<9:>xx.)
ITSP, PSTN, and ISDN, with International Dialing:
•
Line 1, a SPA400 connected to Line 2 for PSTN services, and a third-party ISDN gateway connected
to Line 3 for ISDN services . The user (in Spain) would like to press 0 for Line 1, which is going to
be used for international calls, and to press 9 PSTN and ISDN lines, which are going to be used for
national, local, and mobile calls . Then the user would like to route all outbound national and local
calls through the ISDN line, with exception of mobile numbers (in this example mobile numbers
start with 6) . Those calls should be routed to the PSTN line .
Call Routing Rule: (<:L1>0xx.|<:L2>96xx.|<:L3>9xx.)
Phone dial plan (Spain): ([09],[01][1689][012]S0|[09],[1-9]
xxxxxxxxS0|[09],xx.|[1-8]xx)
Line 1 Dial plan: (<0:>xx.)
Line 2 Dial plan: (<9:>xx.)
Line 3 Dial plan: (<9:>xx.)
Linksys Voice System Installation and Configuration Guide
Configuring Phone Service and Voice Mail
The system has an ITSP service connected to Line 1 and a SPA400
The system has an ITSP service connected to Line 1 and a
Outbound Call Routing
The system has an ITSP service connected to
63